Dimensional Woodworking & Joinery Tools
Calculate precise trade board footing arrays, handle volumetric wood fiber shrink formulas, map bevel angles, and cross-reference hardware gauges.
Accurate Results
Engineered for precision
Developer Friendly
JSON, API & more
Privacy First
No tracking, no ads
Fold ratio — paper thickness ↔ maximum folds possible
Compute theoretical limit of fold iterations possible for paper size and thickness (Britney Gallivan equation).
Engine displacement — cc ↔ cubic inches ↔ liters
Convert and calculate total engine volume in cc, cubic inches, and liters using cylinder bore, piston stroke, and cylinder count.
Magnetic Declination
Estimate compass alignment values and offset angles between magnetic north and true north.
R-value ↔ U-value — insulation thermal resistance
Convert between R-value thermal resistance and U-value heat transmittance with preset materials lookup.
Inverter sizing — load watts ↔ VA rating needed
Analyze total AC continuous and surge loads to specify the ideal inverter Volt-Amp (VA) and wattage ratings.
WOODWORKING Utilities
Choose a specialized option to begin instant real-time conversion.
Board feet ↔ cubic meters ↔ cubic feet — lumber volume
Convert lumber volume measurements between Board Feet, Cubic Feet, and Cubic Meters.
Sandpaper grit — CAMI ↔ FEPA ↔ micron rating
Convert and compare sandpaper abrasive grit sizing standards between CAMI, FEPA (P-grade), and average micron rating.
Wood moisture content ↔ shrinkage percentage
Calculate expected wood dimensional shrinkage (radial, tangential, volumetric) based on changes in wood moisture content below fiber saturation point.
Dovetail angle — ratio ↔ degrees for hardwood vs softwood
Convert dovetail joint slope ratios (e.g. 1:6, 1:8) to slope angles in degrees and verify hardwood/softwood suitability.
Chisel bevel angle — degrees ↔ sharpening guide setting
Calculate chisel bevel angles and determine the exact projection distance needed for hone sharpening guides.
Nail size — penny (d) ↔ mm ↔ inches length
Convert traditional penny (d) nail sizes to absolute physical lengths in millimeters and inches, including standard shank gauge and nail types.
Screw gauge ↔ mm diameter — imperial vs metric screws
Cross-reference standard wood screw gauges with thread diameter in millimeters and inches for pre-drilling and pilot holes.